Luxury American Oak Acoustic Slat Wood Wall Panels | Original Slatpanel®

Each box contains two panels measuring 94.49" x 12.60". These panels will join next to each other seamlessly with no join line showing.

Small & Regular Panels:

- Free shipping on all orders

Large & X-Large Panels:

- Free shipping on all orders over 10

- Minimum order quantity of 4

- Order 4 - 5: $350 shipping charge

- Order 6 - 7: $250 shipping charge

- Order 8 - 9: $150 shipping charge

- Order 10+: Free shipping

At WVH®, you have 30 days to return your wall paneling order, provided the box remains unopened. To initiate a return or exchange, please contact our customer service team, who will guide you through the process. Ensure you have your order number and details handy for a smooth procedure. You can read our full return policy here.

There are three different options for installing our panels:

• Gluing straight onto the wall:
  A construction adhesive is recommended for this approach.

• Screwing directly into the wall:
  Depending on the backing color, use either black screws for black backing or silver or grey screws for grey backing. We recommend a minimum of nine screws per panel at regular intervals across the width and 800mm down the length. If installing into ceilings, ensure they are screwed into ceiling joists. Please use the appropriate fixings for different wall types, such as plasterboard.

• Screwing into 45mm timber battens:
  For optimum sound absorption, we recommend screwing 45mm timber battens to the wall and then securing the panels directly to the battens. Adding a material like Rockwool behind the panels and between the battens will achieve Class A sound absorption.

You can install the panels on any surface, including brick, concrete, and plasterboard.

The panels are designed for interior use only.

Of course! The panels can be installed in these areas, as long as they are not in direct contact with water. We recommend, where possible, applying a water-resistant finish to the front of the slats to give them an extra layer of protection.

The panels have been designed to have the edge exposed, but you can always trim off the excess felt to have a flush finish. The slats are the same color throughout, so a cut edge will look like the rest of the panel without any extra steps.

It's straightforward to install around sockets and other wall-mounted fixtures. You can cut through the slats with a sharp saw, and the felt with a sharp blade, like a utility knife, to get a snug fit around your sockets and windows.

You can! If you need access to the wiring, we recommend installing them on wooden battens where possible.

We offer a range of standard sizes that cater to the needs of most projects, which you can select from our size drop-down. The panels are designed to be easily cut down to size if required. They also join together seamlessly if you need to fill a larger area.

We do not currently offer bespoke sizes and designs, but if you have any specific requirements or are looking to order in bulk, don't hesitate to contact our customer service team for more information.

The finish available is a satin oil professionally applied to give an even coating across the panel.

Use a microfibre cloth to wipe off any surface dust from the panels. To remove any scuffs or marks, use a damp cloth to remove them easily.

Absolutely! We believe in the quality of our products and want you to be 100% confident in your choice. Visit our dedicated samples page to purchase your sample pack today.