Drew & Jonathan Home™ Flutto® Valley Walnut Flexible Tambour Panels

Yes. Samples are available across most product ranges, so you can see and feel the real material before committing. Acoustic panel, wood veneer, and cork tile samples can all be ordered. Check individual product pages for availability.

Most wall panels are rigid. They work beautifully on flat walls, but they can’t follow a curve. The Flutto® Valley can, with one important consideration: because of its concave profile, the panel can only flex to wrap convex curves, such as columns and curved walls that bow outward. It cannot be reversed to follow a concave recess. If your space has that kind of outward curvature, a flexible panel is not a compromise. It is the right tool.

The Flutto® Valley comes in two sizes: 94.5 x 11.8 in. and 118.1 x 11.8 in. Each box contains two panels. Choose the longer format for fewer seams on a tall wall, or the shorter for easier handling in tighter spaces.

Oak and walnut. Both feature a real wood veneer wrapped over the MDF core, with the fabric backing color-matched to the face. Order a free sample first. The grain varies between boards the way real wood always does, and it is better to feel that in your hands before you commit to a full wall.

Adhesive to the wall, panel to the adhesive. No rails, no clips, no visible fasteners. The full installation guide is above. The surface needs to be clean, dry, and flat. Allow 48 hours for the panels to acclimate before installation.

Yes. Use a sharp, fine-tooth saw to cut across the width or length of the panel. Apply masking tape along the cut line to reduce splintering, then sand lightly if needed. Please make sure to always wear safety goggles when cutting or sanding any of our products.

The water-resistant fabric backing provides resilience during installation and in areas of occasional moisture. They are not designed for prolonged water exposure or for use in steam rooms. For bathrooms, use them on walls away from showers or tubs, where humidity is the main consideration rather than direct water contact.

Flutto® panels are designed for interior use only. They are not weatherproof. For outdoor applications, see our Plaank® composite range.

No. Flutto® is a decorative range designed for visual impact, not sound absorption. For acoustic performance, see our Slatpanel® range of acoustic slat wall panels.

No. Flutto® panels do not carry a fire rating. For fire-rated specifications, see our Slatpanel® Fire-Rated range.

Standard wood panels and acoustic felt backing are not waterproof and should not be used in direct water contact areas such as shower enclosures or behind kitchen backsplashes. For bathrooms, panels work well on dry walls away from the shower zone. For kitchen backsplashes, we recommend glass or tile behind the range and panels on adjacent walls.

We recommend checking out our line of Hydro waterproof slat panels for use in any interior wet space.

Yes. The surface arrives ready to go up. If you’d like to apply a wood oil or treatment to alter or deepen the tone over time, test on a sample first to confirm the result before committing to the full installation. Apply any oils before installing for a clean, even finish.

Flutto® panels can bend down to approximately 11.8 in. internal radius. For tighter curves, cut the panel into narrower sections first. For columns or pillars, measure the radius and test-bend a cut-off before committing to a full panel. The Flutto® can be bent around a 90-degree corner cleanly if needed, and will show the fabric backing.

The Flutto® family includes four profiles: Ridge, Mini Ridge, Slat, and Valley. The slat dimensions are designed to complement one another, so you can mix profiles across a space without the seams feeling accidental. All are flexible, all share the same construction, and all carry the same real wood veneer finish.

We photograph every product as accurately as possible. Because we use real wood and natural materials, subtle variations in grain pattern and tone occur between production batches. This is a characteristic of genuine wood, not a defect. We always recommend ordering a sample to confirm the color and texture in your own lighting.

Drew and Jonathan Scott, The Property Brothers, have been working with WVH® over the past year to bring a range of panels to market that reflect their approach to renovation: real materials, genuine quality, nothing decorative for its own sake. Their name is on the box because they were involved in making what is in it.

A soft, dry or lightly damp cloth is all you need. Avoid abrasive cleaners, bleach, or solvents. Real wood veneer ages well when it is left to do so.

Yes. We offer trade pricing for interior designers, architects, contractors, and trade professionals. Apply for a WVH® Pro trade account through our website or contact our trade team directly for project pricing and volume discounts.

Small & Regular Panels: Free shipping when you order 5 or more boxes
Large & X-Large Panels: Free shipping when you order 10 or more boxes

Shipping Fee Details (Per Box)

Small & Regular Panels:
Qty 1-4 Boxes | $75 Shipping Fee
Qty 5+ Boxes | Free Shipping

Large & X-Large Panels: 4 Unit Minimum Qty
4-5 Boxes | $400 Shipping Fee
6-7 Boxes | $300 Shipping Fee
8-9 Boxes | $200 Shipping Fee
10+ Boxes | Free Shipping

Contact us to arrange a visit. We want to have the right products and samples ready for you to see in person.

You can return unused products within 30 days of delivery. Items must be in their original, undamaged packaging. Refunds are processed once we receive and inspect the return. For full terms, including sample returns, visit our returns page or contact our customer service team.