Flutto® White Slat Flexible Tambour Panels

Wall panels will arrive in a cardboard box with two pieces that join together seamlessly for ease of handling and installation.

Parcel Shipments

• Items will arrive to their destination based on standard shipping service methods, typically left at the front door or entrance to the property.

LTL/FTL Shipments

• For residential shipments, items will be palletized and delivered with a liftgate service to the curbside of the recipient address.
• For commercial shipments, items will be palletized and delivered to shipping/receiving via the loading dock if available. Otherwise items will be delivered curbside via liftgate service.

Please note that some handling may be required during delivery and unloading.

If you require any assistance or would like to set up white glove delivery, please reach out to our Customer Support team via phone at 302-216-6177 or via email at support@thewoodveneerhub.com

The Flutto™ range is available in 47.24" and 94.49" lengths at this time, and can be seamlessly joined to cover a larger area, or cut down to finish off a small corner.

The Flutto™ range has been designed to be installed with ease. We recommend gluing the panels directly to the surface you're planning to install on. Ensure the surface is smooth, clean and dust-free, to allow for the best adhesion possible.

We do not currently offer the panels in custom sizes; however, we have designed them to be easily cut if you need smaller or they can be joined if you need to cover larger areas.

Flutto™ Panels will be absolutely fine in these areas if a water resistant finish is added and they are not in direct contact with water. We do recommend applying a water-resistant finish to the front of the wooden slats to protect them against any moisture or humidity wherever possible though.

The Flutto™ range is designed for interior use only.

It is straightforward to install the panels to fit around any object! Simply use a sharp, fine-tooth saw to cut through the panels and slats. If you are only cutting through the backing, scoring the mesh with a utility knife will quickly cut down the panels.

You can install the panels on any surface, including brick, concrete, and plasterboard.

The panels have been designed to have the edge exposed, but you can always trim off the excess felt to have a flush finish. The slats are the same color throughout, so a cut edge will look like the rest of the panel without any extra steps.

You can! If you need access to the wiring, we recommend installing them on wooden battens where possible.

At WVH®, you have 30 days to return your wall paneling order, provided the box remains unopened. To initiate a return or exchange, please contact our customer service team, who will guide you through the process. Ensure you have your order number and details handy for a smooth procedure. You can read our full return policy here.

Use a microfibre cloth to wipe off any surface dust from the panels. To remove any scuffs or marks, use a damp cloth to remove them easily.

Absolutely! We believe in the quality of our products and want you to be 100% confident in your choice. Visit our dedicated samples page to purchase your sample pack today.