Culebra Peak White Reclaimed Wood Wall Panels

Preparation for our reclaimed timber wall panels is a breeze. You should remove the panels from their packaging and leave them in the desired room. They’ll be ready to install in about two days. The wood needs to acclimate to the temperature changes in the room. It would help if you also cleaned off your walls with a dry cloth, ensuring a clean surface before fitting your panels.

For our reclaimed wood paneling, you only need the length and width of your surface. Our weathered wood panels are available in different lengths, so you’ll want to measure your walls before selecting your panels. We have a handy box calculator above, which can help with this.

You will need construction adhesive, a caulk gun, a hammer, 2” finish nails, a saw, a pencil, a tape measure, and a level. Before starting the installation process, you must let the wood acclimate. Remove the cladding panels from their boxes, leave them strapped together, then set them in the room you’re installing. Let the cladding adjust for 2-3 days. You should always install wood cladding panels on a dry, smooth, structurally sound surface.

Follow these steps to apply your wood cladding panels:

1. Trace around electrical outlets and light switch plates in pencil, then remove them.
2. Remove the straps from the wood planks and lay them out on the floor in your desired pattern. Make any adjustments to the design as necessary.
3. An optional step is painting the surface behind your cladding panels a dark color to make gaps between the planks less noticeable.
4. Use a pencil and a level to make a straight reference line on your wall (or the surface you’re mounting the cladding to). Put the line at about eye level and draw it all the way across your surface.
5. Use the caulk gun to apply construction adhesive to the back of your first plank. Draw it on in an “S” shape, avoiding putting adhesive too close to the edges of the plank.
6. Stick the plank with adhesive on the wall, just below, and flush with your penciled reference line.
7. Secure the plank with four nails, one on each corner. Each nail should be about one-half inch from the edge of the board.
8. Repeat steps 5-7 with a second plank. Complete one row of boards on your surface, ensuring they’re placed along your reference line.
9. Start your second row of planks. Stagger the edges of the boards from the row directly above it. Otherwise, you’ll create ugly seams.
10. Leave just over 20 cm between the edges of boards from row to row.
11. For the edges of your wall or ceiling, you’ll have to measure a plank and saw off any excess before applying it.
12. When you get to spots on your wall with outlets and switch plates, follow the same method you used for edge pieces in step 10.
13. You may have to make horizontal cuts to your wood planks when applying them at the top or bottom of your surface, as well as near outlets and light switch plates. Use a jigsaw for smaller horizontal cuts.

The wood used in our weathered wall paneling range is 100% genuine reclaimed wood sourced sustainably from North America. All of our reclaimed products are certified by the Forest Stewardship Council.

We accept a variety of payment methods including Visa, MasterCard, American Express, ShopPay and PayPal for your convenience.

We offer free shipping on all of our product ranges to the continental USA. Orders of in-stock products will be processed and dispatched within 48 business hours, and please allow up to 14 days for delivery, although we aim to have your order to you as quickly as possible. You will be notified when your order is dispatched and provided with a tracking number through the courier.

We value your time and aim to deliver your order as quickly as possible. All our wall panels are in stock in our West and East Coast warehouses and shipped within 48 hours of receiving the order. If a product is on pre-order, this will be clearly stated on the product page so you can plan accordingly.

Keeping tabs on your order is simple. We offer order-tracking capabilities through our tracking portal. Once your order is shipped, you'll receive a tracking number via email, which you can use to monitor your shipment's progress until it reaches your doorstep.

We understand that sometimes things don't go as planned. At WVH®, you have 30 days to return your wall paneling order, provided the box remains unopened. To initiate a return or exchange, please get in touch with our customer service team, who will guide you. Ensure you have your order number and details handy for a smooth procedure.

It's straightforward to install around sockets and other wall-mounted fixtures. You can cut through the slats with a sharp saw, and the felt with a sharp blade, like a utility knife, to get a snug fit around your sockets and windows.

You can! If you need access to the wiring, we recommend installing them on wooden battens where possible.

We offer a range of standard sizes that cater to the needs of most projects, which you can select from our size drop-down. The panels are designed to be easily cut down to size if required. They also join together seamlessly if you need to fill a larger area.

We do not currently offer bespoke sizes and designs, but if you have any specific requirements, or are looking to bulk order, please contact our customer service team for more information.

Use a microfibre cloth to wipe off any surface dust from the panels. To remove any scuffs or marks, use a damp cloth to remove them with ease.

Absolutely! We believe in the quality of our products and want you to be 100% confident in your choice. Visit our dedicated samples page to purchase your sample pack today.