Ultraflex Lightweight Flexible Wood Wall Panels

The panels only come in one size but they can be joined horizontally and also vertically to achieve any size you require. When installing horizontally the join will be seamless. If installing vertically there will be a small join line showing. Please feel free to contact us if you would like pictures of examples of this.

There are 3 different options for installing our panels.

1. Gluing straight onto the wall.
   
   A construction glue or grab adhesive is recommended for this.
   
   
   
2. Screwing directly into the wall.
   
   By using black screws for the black backing option or silver or grey screws for the grey-backed option the panels can be screwed directly into the wall through the acoustic felt.
   
   We recommend a minimum of 9 screws per panel at regular intervals across the width and 800mm down the length of the panel.
   
   If installing into ceilings then make sure they are screwed into ceiling joists.
   
   Please make sure the correct fixings are used if going into plasterboard for example.
   
   
   
3. Screwing the panels into 45mm timber batons.
   
   To achieve optimum sound absorption we recommend screwing 45mm timber batons to the wall and then screwing the panels directly into the batons through the acoustic felt.
   
   If something like Rockwool is applied behind the panels and in between the batons, this will achieve Class A sound absorption.

The panels are all in stock, so delivery takes 5-10 days. If we do have to wait for a new production run then it can be 2-3 weeks but please get in contact at the point of order, and we can confirm this right away.

We do not currently offer the panels in custom sizes; however, we have designed them to be easily cut if you need smaller or they can be joined if you need to cover larger areas.

The panels will be absolutely fine in these areas as long as they are not in direct contact of water although we do recommend applying a water resistant finish to the front of the slats to protect them against any moisture or humidity.

The acoustic slat wood wall panel range is designed for indoor use only.

The acoustic panels come unfinished as it allows you to finish it any way you choose. We recommend adding a finish, whether it's an oil, wax, lacquer, or varnish, to protect the wood, and while doing so, it also enhances the grain and colors of the wood.

It is straightforward to adjust the panels to fit around any object. You can cut the slats widthways with a saw, and you can cut the felt lengthways with a sharp blade to then apply around any item you may have on your surface.

You can mount the panels on all surfaces including brick, concrete and plasterboard.

The wood used is always from the same source so they will always look more or less the same. It is natural wood, however, so knots, slight cracks and color variations can occur.

The panels have been designed to have the edge exposed. When cutting through the slats they are black throughout so an edge will always look like the rest of the panels

You certainly can.

The panels are available with a fire-rated felt backing on request. However, the face materials are not. Please get in touch with us for more information.

If installing with batons, then you can use mineral wool or other sound insulation material in-between the gaps which will increase the sound absorption properties even more.

You can return unused acoustic slat wood wall panels within 30 days after delivery.

Yes, you can purchase a sample box by clicking here.